AK Receivers From NoDak Spud®

If you have any questions please e-mail us at info@nodakspud.com

or call 952-942-1909

You can fax a copy of your FFL to: 952-942-1912

**READ THIS**

 WE HAVE CANCELLED THE AK CUSTOM SERIAL NUMBER PROGRAM.

 WE DO NOT OFFER THIS SERVICE ANYMORE.

Selector markings are available for an additional $20

They are pre-marked in batches, and are limited to inventory on hand

Please go to the selector markings page for more info on available markings

ALL FFL ITEMS WILL BE SHIPPED WITH "ADULT SIGNATURE REQUIRED"

Quality single hook style AK fire control parts made in the USA by Arsenal Inc of Las Vegas.

NDS-29

 $42 each  +$5.25 shipping

Status: in stock / ready to ship

There is no additional shipping charge if purchased and shipped with a receiver.

You can mix-n-match receivers of the same price levels for the quantity discounts.

An example would be the NDS-1 and NDS-2EZ. If you bought one of each, you would get the 2-5 piece price of $83 each.

You can only combine receivers for quantity discounts if they have the same qty 1 price.

Please refer to the terms and conditions page for more details

 SHIPPING ON RECEIVERS IS GROUND UPS TO THE DEALER

ALL FFL ITEMS WILL BE SHIPPED WITH "ADULT SIGNATURE REQUIRED"

 To order our products:

Please Call: 952-942-1909 to pay with credit card

Or go to the order page and print off the form, then send it to the address provided.

We are producing two basic "Premium" AKM type receivers. They are made as  authentic reproductions of current European patterns. The part #'s are;

NDS-1     Caliber 7.62x39 for AKM type kits. Based on the Hungarian SA-85 pattern.

NDS-2    Caliber 5.45x39 for AK74 type kits. Based on the Bulgarian SLR-105 pattern.

Many of our other receivers are based off these basic platforms

Some of the features these receivers have are;

authentic top rail step-down

no selector markings/selector stop notches

"trigger hump" on bottom of AK74

correct style mag well dimples for each model

correct lower rails w/mag guides and ejectors appropriate to caliber

mag wells cut to correct width for each caliber

fully heat treated 4130 steel

AK Parts Kits are available from these sources:

https://www.apexgunparts.com/index.php/cPath/51

http://whatacountry.com/parts-kits.aspx

http://www.atlanticfirearms.com/storecategory144.aspx

http://armsofamerica.com/partskits-2.aspx 

AK parts kits, rivet sets, and build tools are available from

http://ak-builder.com/index.php

"Premium" AKM receiver. Based on the Hungarian SA-85 caliber 7.62x39

Qty 1:   $85 shipped    2-5 $83 shipped    6-20 $80 shipped

Status: in stock / ready to ship  

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

"Premium"  7.62x39 AKM receiver that fits AKS74 style sidefolder stocks.

Make that "Khyber Pass" type AK you've always wanted.

 This variant has the pistol grip reinforcement plate installed.  caliber 7.62x39

Price: Qty one: $105 Shipped

Qty 2-5: $103,  Qty 6-20: $100

Status: in stock / ready to ship

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

"Premium" Polish or Hungarian AKMS underfolder receiver. This variant has the pistol grip reinforcement plate installed. caliber 7.62x39

Price: Qty one: $96 Shipped

Qty 2-5: $93,  Qty 6-20: $90

 Status: in stock / ready to ship

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

"Premium" Romanian MD-63  underfolder receiver.

caliber 7.62x39

Price: Qty one: $96 Shipped

Qty 2-5: $93,  Qty 6-20: $90

Status: Completely SOLD OUT as of 1/19/12

Limited qty (only 48 made in this batch)

ALL FFL ITEMS WILL BE SHIPPED WITH "ADULT SIGNATURE REQUIRED"

"Premium" AK74 receiver. This receiver is designed for the fixed stock kits on the market.  It was copied directly from the Bulgarian SLR-105. Caliber 5.45x39

Price: Qty one: $96 Shipped

Qty 2-5: $93,  Qty 6-20: $90

 Status: in stock / ready to ship

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

This will allow you to cut the details for an AK100 series folding stock yourself.

NDS-2 "EZ"

This is the NDS-2 "Premium" modified for easier assembly.

Some of the features:

Top Rail step-down

Pre-drilled front trunion and rear block rivet holes

Left side pre-drilled for AK-74 pattern scope rail mounting

Only available with "S" and "F" selector markings and selector stop notch

NDS-2 "EZ":

Caliber 5.45x39 only

Price: Qty one: $85 Shipped

Qty 2-5: $83,  Qty 6-20: $80

 Status: in stock / ready to ship

Fewer than 25 available

You can only combine receivers for quantity discounts if they have the same qty 1 price.

Please refer to the terms and conditions page for more details

"Premium" AKS74 sidefolder receiver. This variant comes without the pistol grip reinforcement plate.    caliber 5.45x39

The new batch do not have pre-drilled front trunion rivet holes. They will still have the hole and slot for the stock latch.

**NEW PRICING**

Price: Qty one: $105 Shipped

Qty 2-5: $103,  Qty 6-20: $100

Status: completely SOLD OUT as of 2/2/12

There will be another batch sometime in May/June

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

"Premium" AKS74 sidefolder receiver. This variant comes with the "round tab" pistol grip reinforcement plate.    caliber 5.45x39

The new batch do not have pre-drilled front trunion rivet holes. They will still have the hole and slot for the stock latch.

**NEW PRICING**

Price: Qty one: $110 Shipped

Qty 2-5: $108,  Qty 6-20: $105

Status: completely SOLD OUT as of 1/31/12

There will be another batch sometime in May/June

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

This is the only receiver on the market that allows installation of the original Tantal safety and selector levers!

Also, it is the only receiver that has replicated the original left side selector markings and detents!  Caliber 5.45x39

Price: Qty one: $105 Shipped

Qty 2-5: $103,  Qty 6-20: $100

Status: SOLD OUT as of 10/26/11

We are looking at doing another production run sometime in 2012

Email us at info@nodakspud.com to get on the "interested parties" list 

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

This is an AK74 rifle built as an underfolder

  photo courtesy of nictra

(gun not included)

Same as our NDS-2 receivers, but cut in the rear end for AKMS (Polish) pattern underfolder stock hardware.

Make something that will turn heads at the range and confuse the AK "purists".

Caliber 5.45x39

Price: Qty one: $110 Shipped

Qty 2-5: $108,  Qty 6-20: $105

Status: in stock / ready to ship

No selector marking option available, sorry.

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details 

Our Best Seller: NDS-3 "economy" AKM receiver

 ( There are well over 50,000 of this basic type in circulation )

It does not have some of the finer details of our premium AKM and AK74 receivers, but is made to the same high standards. Like the rest of our products it is FULLY heat treated 4130 to 40 on the Rockwell "C" scale.

Some of the features it DOES NOT HAVE are:

top rail step-down (needed for full auto builds)  

THINGS IT DOES HAVE:

pre-drilled rivet holes for Romanian / Hungarian fixed stock kits

fully heat treated 4130 steel

"S" and "F" selector markings

"X" and "Y" marks at hammer/trigger holes

competitively priced with ground UPS shipping included

NDS-3  "Economy" AKM caliber 7.62x39

Price:

Qty 1-10:  $60 shipped   11-20: $57 shipped   21+: $55 shipped

Status: in stock / ready to ship

We don't recommend the use of the Tapco G2 "single hook" trigger in the NDS-3.

There have been reports of malfunctions when used in this receiver. This only applies to the NDS-3 "economy" receiver

You can only combine receivers for quantity discounts if they have the same qty 1 price.

Please refer to the terms and conditions page for more details

Model NDS-4

Yugo M70AB2 Underfolder Receiver caliber 7.62x39

Price: Qty one: $110 Shipped

Qty 2-5: $108,  Qty 6-20: $105

Status: in stock / ready to ship   

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

Yugo M70AB1 Fixed Stock Receiver caliber 7.62x39

Price: Qty one: $110 Shipped

Qty 2-5: $108,  Qty 6-20: $105

Status: in stock / ready to ship    

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

Model NDS-65

Hungarian AMD 65 Folding Stock Receiver caliber 7.62x39

Based off the "Premium" NDS-1 shell, this one has all the enhanced features of that model with the back end cut for the AMD-65 rear block.

Price: Qty one: $96 Shipped Qty 2-5: $93,  Qty 6-20: $90

Status: in stock / ready to ship    

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

Model NDS-7

Romanian RPK Receiver caliber 7.62x39

The new version will have mag dimples to replicate the earlier guns.

Price: Qty one: $110 Shipped

Qty 2-5: $108,  Qty 6-20: $105

Status: in stock / ready to ship

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

NDS-9 Yugo M72 RPK's

This is the same basic receiver as the NDS-5, except it doesn't have the top cover locking pin holes.

NDS-9 caliber 7.62x39

Price: Qty one: $110 Shipped

Qty 2-5: $108,  Qty 6-20: $105

Status: in stock / ready to ship

 You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

Model NDS-Y556

Yugo M95 Underfolder Receiver.

A dedicated receiver set up with a caliber specific 5.56x45 ejector rail.

Also, due to the longer 5.56 mag (front to back) we have pre-cut the back of the magwell and mid rivet to allow it to be rotated into the receiver.

Price: Qty one: $110 Shipped

Qty 2 or more: $105

Status: SOLD OUT as of 12/28/11

We are looking at doing another production run sometime in 2012

Email us at info@nodakspud.com to get on the "interested parties" list 

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details

"Premium" Yugo underfolder receiver. This variant will fit the M92 "Krinkov"  and AKM based M70 kits on the market.   caliber 7.62x39

Price: Qty one: $96 Shipped

Qty 2-5: $93,  Qty 6-20: $90

Status: SOLD OUT as of 12/29/11

We are looking at doing another production run sometime in 2012

Email us at info@nodakspud.com to get on the "interested parties" list  

You can only combine receivers for quantity discounts if they have the same qty 1 price. Please refer to the terms and conditions page for more details